Vitamin gummies are one of the hardest products to manufacture consistently. The active ingredients are heat-sensitive and pH-sensitive. The dosage per piece has to be accurate. For one vitamin brand, these challenges showed up as a rejection rate of nearly 15% on their existing candy production line.
The problem was not the recipe. It was the process. The brand was using a traditional Starch Mogul Line, where starch trays serve as molds. Starch is recycled, and as it wears, piece weight drifts, residual active ingredients carry over, and surface defects increase. For a product making dosage claims, this is a compliance issue, not just a quality issue.
Switching to a Yucho starchless depositing line solved three problems at once: cross-contamination, weight inconsistency, and surface defects. This case study explains how—and what results the brand achieved.
Starch mogul lines were designed for conventional candy. They work well for mass-market gummies where slight weight variation is acceptable. But vitamin gummies are different:
Dosage accuracy. If the label says 100 mg of vitamin C per gummy, every piece must meet that claim. Weight variation directly affects dosage variation.
Cross-contamination. Recycled starch carries residual active ingredients from batch to batch. For functional products, this is a compliance risk.
Surface quality. Starch residue causes appearance defects and seal failures in packaging—rejects at quality control.
The brand needed accurate dosage, consistent weight, and GMP-level hygiene. Their candy making machine could not deliver that.
Yucho proposed a starchless line using precision metal molds instead of starch trays.
Closed-system depositing. Gummy mass goes directly into metal molds via servo-controlled heads. No starch, no tray handling, no cross-contamination.
Accurate weight control. Servo-driven depositing holds piece weight to ±1–2%—essential for dosage claims.
Temperature-controlled cooling. A controlled tunnel sets the gummy evenly, reducing surface defects.
GMP-compatible design. 304 food-grade stainless steel, smooth surfaces, easy-access cleaning points.
The line was configured for the brand's specific product: a pectin-based vitamin gummy with a target piece weight of 2.5 grams.
After the switch, the brand reported:
| Metric | Before | After |
|---|---|---|
| Rejection rate | ~15% | ~3% |
| Piece weight accuracy | ±5% | ±1.5% |
| Cross-contamination risk | Present | Eliminated |
| Changeover time | 60–90 min | 20–30 min |
| Cleaning time | 2–3 hours | 45–60 min |
The rejection rate dropped from approximately 15% to approximately 3%—a reduction of about 80%. The brand attributed this to accurate depositing weight, elimination of starch contamination, and consistent cooling.
At 500 kg per day, the difference between 15% and 3% rejection is 60 kg of product per day—product now sold instead of discarded.
Starch lines were designed for conventional candy, not functional gummies. For products with dosage claims and strict hygiene requirements, the starch medium and tray handling are a liability.
Weight accuracy is tied to dosage accuracy. Servo-controlled depositing delivers the precision that starch lines cannot.
The switch pays for itself. Lower rejects, shorter changeover and cleaning times, and improved compliance all reduce cost per unit. For most producers, the line pays back within one to two years.
For vitamin gummy brands, consistency is a compliance issue. A starchless depositing line delivers the weight accuracy, hygiene, and process control that functional gummies require.
The brand in this case study reduced its rejection rate by 80% and improved its cost position at the same time. The same result is achievable for other functional gummy producers—provided the equipment is configured for the product and the process is properly validated.
Shanghai Yucho Industrial Co., Ltd. supplies starchless depositing lines and complete Candy Production Lines for functional gummies, vitamin gummies, and other confectionery products. Our process specialists work with your formulation and production requirements to configure the line for your specific product. All equipment is built with 304 food-grade stainless steel and designed for GMP-compliant operation.
If you are producing functional gummies and want to evaluate a starchless line, send us your product type, target capacity, and current rejection rate. Our engineers will assess your requirements and propose a solution.
„Thanks to the LUVIR technology, the solder resist process could be switched directly from the previously used mask exposure to direct exposure. As an outstanding digital solution on the market, this technology has been able to demonstrate fast process times and superior quality on our certified conventional ink in production. This allowed us to fully digitize the solder mask process at low cost – without process or ink adjustments. An excellent benefit to our production in Rot am See.“
Ralf Göhringer (Head of Production WE Rot am See)
I would definitely recommend the Limata machine and team for a future company purchase
Michael Greenaway
Compunetics Inc.
“The Limata ldi has been amazing!! Best thing we did was buy this machine”
Richard Brady
GM
Circuitlabs
“Since 2019, we have been running the Limata X1000 LDI system (including LUVIR for solder mask imaging) in daily production as an addition to our current process with film. The machine was capable of properly exposing Taiyo PSR-4000 BN (DI) solder mask types on normal to high-copper boards using a new and unique direct imaging process. The machine operating interface is very user friendly which allowed for a quick technical training curve. The pre-registration processing reduced several seconds of production time at every print. Limata support and service staff is incomparable. They supported our team every step of the way at basically any time of the day or night, with literally, an immediate response time, customizing the software interface to best fit our Operations and needs.
We have exposed more than 8,000 prints since end of October, on various solder mask colors and some resist film panels. Limata, has proven to be very capable and innovative. They are a strong contender in the industry.
We have very much enjoyed this project, and working with the team!
Thank you Limata for the continued support and being a part of our growth.”
Bill Sezate
Vice President, GM
Summit Interconnect
As a replacement to our current contact exposure process with film, the LIMATA X2000 system including LUVIR-Technology was capable of properly exposing non-LDI solder mask types using a direct imaging process. The machine offers cutting edge software with a very intuitive operating interface which allowed for quick technician training curve. The dual drawer system combined with pre-registration processing reduced several seconds of production time at every machine cycle. Limata support and service staff is world class. They added software patches to keep production running at shortest possible response times, customized the software interface to best fit our in-house Operations system, and even wrote a step-by-step machine processing manual. As a result of the project, we have exposed more than 16,000 times on various product types and solder mask brands/colors. Limata, in a very short timeframe as a company, has definitely shown they are truly innovative and will be challenging the industry of direct imaging for the top spot.
Kevin Beattie
Process Engineer
TTM Technologies
Forest Grove Division