When a supplier quotes an industrial gummy making machine at “300 kg/h,” what does that actually mean? Is it the theoretical maximum of the depositor, or the real output at the end of a shift? Most buyers confuse the two.
This guide explains how to calculate real capacity, convert pieces to kilograms, and find the bottleneck that limits your actual throughput.
Capacity starts at the depositor: Cavities × Cycles per Minute × Piece Weight.
To convert to kg/h:
For example, with a 60-cavity mold, 40 cycles/min, and a 2.5g piece (illustrative):
If the machine is a YGDQ300 (rated 300 kg/h), this math shows how mold cavities and piece weight dictate actual output. The rating is a reference, not a guarantee.
A machine rated at 300 kg/h will not produce 300 kg every hour. Real output drops due to startup, cleaning, mold changes, and minor stops. Apply a realistic efficiency factor of 80–90%. For a 300 kg/h gummy bear production line, plan for 240–270 kg/h of good product.
The depositor is rarely the bottleneck—the slowest station is.
Machine: YGDQ450 (rated 450 kg/h)
Assumptions: 90 cavities, 45 cycles/min, 2.5g piece, 85% efficiency, 8-hour shift.
1. Theoretical: 90 × 45 = 4,050 pieces/min = 607.5 kg/h. (This exceeds the rating—normal, as mechanical limits will cap it at 450 kg/h.)
2. Adjusted: 450 kg/h (rated) × 0.85 = 382.5 kg/h
3. Shift Output: 382.5 × 8 = 3,060 kg per shift
This is the number to use for production planning—not the spec sheet.
When requesting a quote, confirm your factory can supply the required utilities:
| Model | Capacity | Speed | Steam | Compressed Air | Power | Length |
|---|---|---|---|---|---|---|
| YGDQ150 | 150 kg/hr | 35–55 n/min | 300 kg/h, 0.5–0.8 MPa | 0.2 m³/min | 18 kW | 14 m |
| YGDQ300 | 300 kg/hr | 35–55 n/min | 400 kg/h, 0.5–0.8 MPa | 0.25 m³/min | 27 kW | 14 m |
| YGDQ450 | 450 kg/hr | 35–55 n/min | 500 kg/h, 0.5–0.8 MPa | 0.3 m³/min | 34 kW | 17 m |
| YGDQ600 | 600 kg/hr | 35–55 n/min | — | — | 38 kW | 17 m |
Note: All models require 20–25°C and 55% humidity. YGDQ600 steam/air specs not listed.
Capacity is not a single number on a spec sheet. It is the result of cavity count, cycle speed, piece weight, and your factory's utilities.
If you are evaluating a Gummy Production Line and want a realistic throughput estimate, send us your piece weight, mold cavities, and shift targets. We will calculate the actual capacity and identify the bottleneck before you buy.
Shanghai Yucho Industrial Co., Ltd. supplies complete Gummy Production Lines, from the YGDQ50-80 tabletop depositor to the YGDQ600 high-capacity line. Our engineers can calculate real capacity based on your recipe, piece weight, and production schedule—and identify the bottleneck before you invest.
„Thanks to the LUVIR technology, the solder resist process could be switched directly from the previously used mask exposure to direct exposure. As an outstanding digital solution on the market, this technology has been able to demonstrate fast process times and superior quality on our certified conventional ink in production. This allowed us to fully digitize the solder mask process at low cost – without process or ink adjustments. An excellent benefit to our production in Rot am See.“
Ralf Göhringer (Head of Production WE Rot am See)
I would definitely recommend the Limata machine and team for a future company purchase
Michael Greenaway
Compunetics Inc.
“The Limata ldi has been amazing!! Best thing we did was buy this machine”
Richard Brady
GM
Circuitlabs
“Since 2019, we have been running the Limata X1000 LDI system (including LUVIR for solder mask imaging) in daily production as an addition to our current process with film. The machine was capable of properly exposing Taiyo PSR-4000 BN (DI) solder mask types on normal to high-copper boards using a new and unique direct imaging process. The machine operating interface is very user friendly which allowed for a quick technical training curve. The pre-registration processing reduced several seconds of production time at every print. Limata support and service staff is incomparable. They supported our team every step of the way at basically any time of the day or night, with literally, an immediate response time, customizing the software interface to best fit our Operations and needs.
We have exposed more than 8,000 prints since end of October, on various solder mask colors and some resist film panels. Limata, has proven to be very capable and innovative. They are a strong contender in the industry.
We have very much enjoyed this project, and working with the team!
Thank you Limata for the continued support and being a part of our growth.”
Bill Sezate
Vice President, GM
Summit Interconnect
As a replacement to our current contact exposure process with film, the LIMATA X2000 system including LUVIR-Technology was capable of properly exposing non-LDI solder mask types using a direct imaging process. The machine offers cutting edge software with a very intuitive operating interface which allowed for quick technician training curve. The dual drawer system combined with pre-registration processing reduced several seconds of production time at every machine cycle. Limata support and service staff is world class. They added software patches to keep production running at shortest possible response times, customized the software interface to best fit our in-house Operations system, and even wrote a step-by-step machine processing manual. As a result of the project, we have exposed more than 16,000 times on various product types and solder mask brands/colors. Limata, in a very short timeframe as a company, has definitely shown they are truly innovative and will be challenging the industry of direct imaging for the top spot.
Kevin Beattie
Process Engineer
TTM Technologies
Forest Grove Division